Heavy Duty Commercial

• ANSI/BHMA A156.3-2014 Grade 1
• UL305 Listed for Panic Hardware
• UL/cUL Listed for up to 3 hours for "A" labeled doors
• UL10C Positive Pressure Rated
• UL10B Neutral Pressure Rated
• Complies with ANSI 117.1 for accessible buildings and facilities

Stainless steel, zinc

1-3/4"

• 36" (914mm) field sizeable to 30" (762mm) panic-rated door and 28" (711 mm) fire-rated door for devices with any monitoring switches or EU/EL
• 48" (1219mm) field sizeable to 36" (914mm) panic- or fire-rated door for devices with any monitoring switches or EU/EL
• 36” (914mm) field sizeable to 34” (864mm) door minimum for devices with motorized electric latch retraction
• 36” (914mm) door minimum for devices with alarm kit, delayed egress or onboard delayed egress
• 48” (1219mm) field sizeable to 42” (1067mm) door minimum for devices with alarm kit
• 48” (1219mm) field sizeable to 40” (1016mm) door minimum for devices with motorized electric latch retraction
• 48” (1219mm) door minimum for devices with delayed egress or onboard delayed egress

• RX - Request to Exit
• RX2 - Dual Request to Exit
• EU/EL - Electrically unlocked / Electrically locked
• ALK - Alarm Kit
• MLR - Motor Driven Electric Latch Retraction
• MLRX- Motor Driven Electric Latch Retraction with Request to Exit
• DE - Delayed Egress
• OBDE - Onboard Delayed Egress

• RX; 125 VAC (3 AMP current); 30 VDC (2 AMP current)
• MLR; 1 AMP in rush @ 24 VDC +/- 2 V
• DE; 430mA @ 24V Single; 680mA @ 24V Tandem
• OBDE; 540mA @ 24V Single; 790mA @ 24V Tandem
• EU/EL; 12 Volt or 24 Volt; 250mA inrush, 10mA holding

• Standard end cap (zinc)
• OPTIONAL Flush end cap (zinc)

• Wood and machine screws,
• Thru-bolts

• US3, US4, US10B, US26, US26D, US32D, BLK
• Trim is not available in US32D

Recommended to be used on appropriately reinforced doors

• Archer, August, William or Withnell lever with escutcheon (3902, 1-5/8" cylinder with standard cam sold separately)
• Mortise cylinder (1-3/8") with cylinder collar (11/16") x optional pull
• Mortise trim (45MB, 45MC, 45MD, 45MN) does not match center line of other 4500, Series trim ( 45BE, 45CE, 45DT, 45NL)

• One year on electrified components
• Lifetime on hardware components

• Status switches (i.e. RX, LM, etc.) require 2 wires per switch to monitor a normally open (NO) or normally closed (NC) position
• All devices provide 3 wires per switch so both NO and NC positions can be monitored
• Monitoring both positions will require 3 wires per switch

• Hex key dogging standard on panic rated devices
• Cylinder dogging available on panic rated devices, specify "CD" ( 3902 1-1/8" (29mm), mortise cylinder sold separately)

3/4" (19 mm) throw with anti-friction tongue, all stainless steel with auxiliary deadlocking latch

• 3" (76mm) in undogged position
• 2-5/8" (67mm) in electrically dogged position

• 4-1/2" (114mm)
• All stile widths are measure from the door edge

• 4-7/8" (124mm) ASA strike-standard
• Stainless steel with plated rollers included standard with panic devices