• Commercial
• Industrial
• Institution

• 2-3/4" (70 mm) - standard
• 2-3/8" (60 mm) - optional
• 3-3/4" (94 mm) - optional
• 5" (128 mm) - optional

• BHMA Certified ANSI A156.2, Series 4000, Grade 1
• ADA Compliant ANSI A117.1 Accessibility Code
• ANSI A250.13 Severe Windstorm Resistant Component
• UL/cUL Listed for all functions up to 3 hours for "A" label single doors (for double door application, UL/cUL Listed when used with 3/4" latchbolt)
• UL10C Positive Pressure Rated
• UL10B Neutral Pressure Rated
• Miami-Dade County, Florida NOA #22-0816.08, Exp. Aug. 16, 2027. Must specify.

• Brass 6-pin, keyed different - Schlage C Keyway - standard
• Cylinder drilled 6 pin, Keyed 5 pin - standard
• Other keying options, including keyed 6-pin, available from factory
• Zero bit cylinders will be 6 pin - standard
• SFIC uncombinated or combinated, brass 6- or 7-pin sold separately
• Large Format Interchangeable Core option available
• LFIC zero bitted or combinated, brass 6-pin sold separately - Schlage C keyway only

1-3/8" - 2" (35 mm - 51 mm)

• Lever: Cast zinc
• Rose: Wrought brass or stainless steel
• Intruder Classroom function has locking indicator arrow stamped on the interior rose

• No exposed mounting screws
• Non-handed
• Free wheeling levers

• US3, US4, US10B, US26, US26D and BLK
• Anti-Microbial Coating (US26D finish only)

• 10 - Passage
• 17 - Dummy
• 40 - Privacy
• 50 - Office
• 53 - Entry
• 70 - Classroom
• 73 - Corridor
• 80 - Storeroom
• 82 - Institution
• 95 - Intruder Classroom

• Comes pre-set for 1-3/4” thick doors for quicker installation
• Threaded mounting bracket adjusts to proper door thickness in seconds
• Only two screws needed to fully secure inside and outside assemblies to the door
• Screws will ratchet tight letting installer know the lockset is properly tightened
• Roses and levers snap on in seconds

• 1/2" (13 mm) throw, stainless steel
• 1-1/8" x 2-1/4" (29 mm x 57 mm) faceplate
• Deadlocking latchbolt prevents manipulation when door is closed; keyed functions only
• Square corner faceplates standard, round corner available
• 3/4" (19 mm) latch available

Archer, August, Withnell

• Heavy gauge steel, zinc dichromated for corrosion resistance
• Free wheeling levers
• Thru-bolt mounting levers

• 2-1/8" (54 mm) diameter with thru-bolt holes (cross bore)
• Latch hole - 1" (25 mm) diameter (edge bore)

• Lead lined
• Tactile knurling
• Split finish
• Additional latchbolts and strikes available

• 3935 ASA 1-1/4" x 4-7/8" (32 mm x 124 mm) strike - Standard
• 3933 T-Strike - Optional
• 3934 Full Lip Strike - Optional
• 3958 - Full Lip Strike, Round Corner - Optional

Lifetime Warranty