Heavy Duty Commercial

• ANSI/BHMA A156.3-2014 Grade 1
• UL305 Listed for Panic Hardware
• UL/cUL Listed for up to 3 hours for "A" label doors up to 10' in height
• UL10C Positive Pressure Rated
• UL10B Neutral Pressure Rated
• Complies with ANSI 117.1 for accessible buildings and facilities
• Miami-Dade County, Florida NOA #122-0816.08, Exp. Aug. 16, 2027

Stainless steel, zinc

• Hex key dogging standard on panic-rated devices
• Cylinder dogging available on panic rated devices - specify "CD". 3902 Mortise cylinder with standard cam sold separately. Cylinder Length of 1-1/8" (29mm) - 1-3/8" (35mm) is required.

1-3/4" (44mm) - Standard up to 3", except with night latch which is 2-1/2"

• 36" (914mm) field sizeable to 30" (762mm) panic-rated door and 28" (711 mm) fire-rated door
• 48" (1219mm) field sizeable to 36" (914mm) panic- or fire-rated door
• Reference electrified exit device for door width specifications

• Standard end cap (zinc)
• OPTIONAL Flush end cap (zinc)

• Wood and machine screws
• Thru-bolts

• US3, US4, US10B, US26, US26D, US32D, BLK
• Trim is not available in US32D

01 - Exit Only (device)

• Top - 1/2" (13mm) throw, Pullman type with automatic dead-latching, stainless steel
• Bottom - 1/2" (13mm) throw, Pullman type, held retracted during door swing, stainless steel

• 7' (2134mm) - Standard
• 8' (2438mm) Optional
• 10' (3048mm) Optional (panic device only)

• Center line prep is 40". If door prep elevation is lower, a longer rod will need to be ordered.
• Recommended to be used on appropriately reinforced doors
• The 4500 SVR tested configuration for Miami-Dade County, Florida NOA #17-1226.23, used a panic threshold with no bottom strike. The suggested Hager part is the 520S but any approved panic threshold can be used. Please see the NOA for further details.

• 3" (76mm) in undogged position
• 2-5/8" (67mm) in dogged position

• Rods for 7' (2134mm) door - Standard
• Rods for 8' (2438mm) door Optional
• Door height of 7' (2134mm) requires 33-1/4" (845mm) top rod length
• Door height of 8' (2438mm) requires 45-1/4" (1149mm) top rod length
• Extension rods kits available, 2' (610mm) or 3' (914mm)

• 5-3/8" (137mm) minimum stile width required for single door and 5/8" (16 mm) stop
• 4-7/8" (124mm) minimum stile width required for double doors
• 4-7/8" (124mm) minimum stile width required for double door x Rim device with double door strike
• All stile widths are measured from door edge

• Stainless steel with plated rollers - Included standard with panic devices
• Solid stainless steel - Included standard with fire rated devices
• Surface applied to frame with slotted holes for easy adjustment
• 10' (3048mm) fire rated device requires strike and hook kit, 4912, for top strike
• Double door strike for use with surface vertical rod and rim device available

• Archer, August, Charles, Johnston, Joshua, Louis, Warren, William or Withnell lever with escutcheon trim
• Pull plate trim (excluding 45PT)
• Rim cylinder x optional pull

Lifetime