• Heavy duty commercial
• NOT recommended for single-rabbet double egress frames
• NOT recommended for doors with inset greater than 1/8"

• ANSI/BHMA A156.3-2014 Grade 1
• UL305 Listed for Panic Hardware
• UL/cUL Listed for up to 3 hours for "A" labeled doors up to 10' in height
• UL10C Positive Pressure Rated
• UL10B Neutral Pressure Rated
• Complies with ANSI A117.1 for accessible buildings and facilities

Stainless steel, zinc

• Hex key dogging standard on panic rated devices
• Cylinder dogging available on panic rated devices - specify "CD". 3902 Mortise cylinder with standard cam sold separately. Cylinder Length of 1-1/8" (29mm) - 1-3/8" (35mm) is required.

1-3/4" (44mm) - Standard

• 36" (914 mm) field sizeable to 30" (762mm) panic-rated door and 28" (711mm) fire-rated door
• 48" (1219 mm) field sizeable to 36" (914mm) panic- or fire-rated door
• Reference electrified exit device for door width specifications

• Standard End Cap (Zinc)
• OPTIONAL Flush End Cap (Zinc)

• Wood and machine screws
• Thru-bolts

• US3, US4, US10B, US26, US26D, US32D, BLK
• Trim not available in US32D

01 - Exit Only (device)

• Top - 1/2" (13mm) throw, Pullman type with automatic dead-latching, stainless steel
• Bottom - 1/2" (13mm) throw, Pullman type, held retracted during door swing, stainless steel

• 7' (2134mm) - Standard
• 8' (2438mm) - Optional
• 10' (3048mm) - Optional (panic device only)

• Center line prep is 40" (1016mm) - If door prep elevation is lower, a longer top rod will need to be ordered
• Recommended to be used on appropriately reinforced doors
• NOT recommended for doors with inset greater than 1/8", ex. double egress frames or jamb depths over 5-3/4" or  greater
• A spring loaded fire bolt 2-649-0166 must be used on fire-rated LBR devices used on a pair of doors to ensure the device's fire rating

Grade 1 Concealed Vertical Rod Exit Device, Less Bottom Rod

• 3" (76mm) in undogged position
• 2-5/8" (67mm) in dogged position

• Rods for 7' (2134mm) door - Standard
• Rods for 8' (2438mm) and 10' (3048mm) doors - Optional
• Door height of 7' (2134 mm) requires 34-5/8" (879 mm) top rod length
• Door height of 8' (2438mm) requires 46-5/8" (1184mm) top rod length
• Extension rod kits available 2' (610mm) or 3' (914mm)

• 4" (102mm) minimum stile width required
• All stile widths are measured from door edge

• Stainless steel with plated rollers included standard with panic devices
• Solid stainless steel included standard with fire rated devices
• Top strike mortised into frame
• Double door strike for use with CVR and RIM device available

• Archer, August, Charles, Johnston, Joshua, Louis, Warren, William or Withnell lever with escutcheon trim
• Pull plate trim (excluding 45PT)
• Rim cylinder x optional pull

Lifetime