Heavy Duty Commercial

• ANSI/BHMA A156.3-2014 Grade 1
• UL305 Listed for Panic Hardware
• UL/cUL Listed for up to 3 hours for "A" labeled doors
• UL10C Positive Pressure Rated
• UL10B Neutral Pressure Rated
• Complies with ANSI 117.1 for accessible buildings and facilities

Stainless steel, zinc

1-3/4" (44mm) - Standard

• 36” (914 mm) field sizeable to 30” (762 mm) panic-rated door and 28” (711 mm) fire-rated door for devices with any monitoring switches
• 48” (1219 mm) field sizeable to 36” (914 mm) panic- or fire-rated door for devices with any monitoring switches
• 36” (914mm) field sizeable to 34” (864mm) door minimum for devices with motorized electric latch retraction
• 36” (914mm) door minimum for devices with alarm kit, or delayed egress
• 48” (1219mm) field sizeable to 42” (1067mm) door minimum for devices with alarm kit
• 48” (1219mm) field sizeable to 40” (1016mm) door minimum for devices with motorized electric latch retraction
• 48" (1219mm) door minimum for devices with delayed egress

• RX - Request to Exit
• RX2 - Dual Request to Exit
• ALK - Alarm Kit
• LM - Latchbolt Monitor
• RXLM - Request to Exit with Latchbolt Monitor
• MLR - Motor Driven Electric Latch Retraction
• MLRX- Motor Driven Electric Latch Retraction with Request to Exit
• MLRXLM - Motor Driven Electric Latch Retraction with Request to Exit and Latchbolt Monitoring
• MLRLM - Motor Driven Electric Latch Retraction with Latchbolt Monitoring
• DE - Delayed Egress

• RX or LM; 3A @125VAC; 2A @ 30 VDC
• MLR; 1A inrush @24VDC
• DE; 430mA @ 24VDC signal; 680mA @24VDC Tandem

Standard Flush End Cap (Zinc)

• Wood and machine screws
• Thru-bolts

3/4" (18mm) throw, pullman type with automatic dead-latching, stainless steel

Recommended to be used on appropriately reinforced doors

• Escutcheon trim
• Rim cylinder x optional pull

• One year on electrified components
• Lifetime on hardware components

• Status switches (i.e. RX, LM, etc.) require 2 wires per switch to monitor a normally open (NO) or normally closed (NC) position
• All devices provide 3 wires per switch so both NO and NC positions can be monitored
• Monitoring both positions will require 3 wires per switch

• 3" (76mm) in undogged position
• 2-5/8" (67mm) in electrically dogged position

• 2-1/8" (54mm) - Minimum stile width required for 1/2" (13mm) blade stop frame and 4950 blade stop strike
• 3-1/4" (83mm) - Minimum stile width required for single door, 5/8" (16mm) stop and 4920 standard strike
• 3-3/4" (95mm) - Minimum stile width required for double door x mullion x 4920 strike
• 2-3/4" (70mm) - Minimum stile width required for double doors with 2" (51mm) mullion and 4952 semi-flush mount strike
• All stile widths are measured from door edge