• Compatable with 29TX Power Supply
• Allows power to be steered from two (2) independent low voltage 12 or 24 VDC power sources into eight (8 independently controlled fused protected outputs
• Power outputs can also be converted to dry form "C" contact

• UL294 Listed - Access Control System Units,
• cUL LIsted for CAN/ULC - s319-05, Electronic Access Control Systems

• Operating temperature: 32°F to 120°F,
• Storage temperature: -4°F to 158°F,
• Relative humidity 93% +/- 5%

• Two (2) independent low voltage inputs,
• Input 1 and Input 2 voltage range: 5VDC to 24VDC, up to 10A each or 20A total input

7.7"

• Outputs are activated by an open collector sink or normally open (NO) dry trigger input from an Access Control System, Card Reader, Keypad, Push Button, PIR, etc. and will route power to a variety of access control hardware devices including Mag Locks, Electric Strikes, Magnetic Door Holders, etc.
• Outputs will operate in both Fail-Safe or Fail-Secure modes
• FACP Interface enables Emergency Egress, Alarm Monitoring, or may be used to trigger other auxiliary devices. The fire alarm disconnect feature is individually selectable for any or all of the four (4) outputs
• Fire Alarm disconnect (latching or non-latching) is individually selectable for any or all of the eight (8) outputs
• Surge suppression
• LED indicators

FUSE RATINGS:

• Output fuses rated at 2.5A each,
• Main input fuses rated at 15A/32V each

• Fuse protected outputs rated at 2.5A per output, non power-limited,
• Total output 20A max (do not exceed the individual power supply ratings)

Dual Input Access Power Controller

One (1) year