HOME
PRODUCTS
ACCESS CONTROL
DESIGN
RESOURCES
DISTRIBUTORS
PROJECTS
MY HAGER
ESTORE
QUICKSHIP
 
 Home > Products > Electrified Solutions > Exit Devices & Trim > 4600 Series Electrified Concealed Vertical Rod

4600 Series Electrified Concealed Vertical Rod

Application: 
- Aluminum Storefront Only

Certifications: 
- ANSI/BHMA A156.3-2014 Grade 1
- UL305 Listed for Panic Hardware

Grade 1 Electrified Concealed Vertical Rod
Exit Devices & Trim
DateDescriptionDownload
Trim: 
- Archer, August, William or Withnell lever with escutcheon trim

Covers: 
- Stainless steel, zinc

Cover Tube: 
- Aluminum

End Caps: 
- Zinc (Flush End Cap standard)

Door Width: 
- 36" (914 mm) field sizeable to 30" (762 mm) door for devices with any 
  monitoring switches
- 48" (1219 mm) field sizeable to 36" (914 mm) door for devices with any
  monitoring switches
- 36” (914 mm) field sizeable to 34” (864 mm) door minimum for devices
   with motorized electric latch retraction.
- 48” (1219 mm) field sizeable to 40” (1016 mm) door minimum for devices with motorized electric latch retraction.
- 48” (1219 mm) door minimum for devices with delayed egress.

Door Height:  - 7' (2134 mm) standard
- 8' (2438 mm) optional

Door Thickness: - 1-3/4" (44 mm) standard

Projection:  - 3" (76 mm) in undogged position
- 2-5/8" (67 mm) in dogged position

Stile Width: - 2-1/8" (54 mm) minimum stile width required
- All stile widths are measured from door edge

Fasteners: 
- Wood and machine screws
- Thru-bolts

Rod Length:  - Rods for 7' (2134 mm) door standard
- Rods for 8' (2438 mm) and 10' (3048 mm) doors optional
- Door height of 7' (2134 mm) requires 33-1/2" (851 mm) top rod length
- Door height of 8' (2438 mm) requires 45-1/2" (1156 mm) top rod length

Latchbolt: 
- 1/2" (13 mm) stainless steel - Top and Bottom

Push Bar:  - OPTIONAL Photoluminescent push bar cover available

Strikes: 
- Stainless steel
- Mortised into aluminum frame & 1/2" threshold

Finishes: 
- US26D and US32D
- US3, US4, US10, US26, BLK - available at extended lead times
- Trim is not available in US32D
- Anti-Microbial available with US26D and US32D 

Functions:  - ED - Electric Dogging
- RX - Request to Exit
- RX2 - Dual Request to Exit
- EDRX - Electric Dogging with Request to Exit
- LM - Latch Bolt Monitor
- RXLM - Request to Exit with Latchbolt Monitor
- MLR - Motor Driven Electric Latch Retraction
(Field Installation Kit 2-649-5007)
- MLRX - Motor Driven Electric Latch Retraction with
Request to Exit
- MLRXLM - Motor Driven Electric Latch Retraction with Request to Exit and Latchbolt Monitoring
MLRLM - Motor Driven Electric Latch Retraction with Latchbolt Monitoring
DE - Delayed Egress

Electrical Specifications:  - ED; .225 AMP @ 24 Volt +/- 2 V
- RX or LM; 125 VAC (3 AMP current); 30 VDC (2 AMP current)
- MLR; 1 AMP in rush @ 24 VDC +/- 2 V
- DE; 430mA @ 24V Single; 680mA @ 24V Tandem

Wire Requirements:                            - Status switches (i.e. RX, LM, etc.) require 2 wires per switch
 to monitor a normally open (NO) or normally closed (NC) position
- All devices provide 3 wires per switch so both NO and NC positions  can be monitored
- Monitoring both positions will require 3 wires per switch 

Quick Connect: - Available on ED, LM, MLR, and RX. Compatiable with Hager Quick Connect Harness Cables which can plug into Hager hinges with quick connect for quick and accurate wiring of the door. 

Warranty:  - One-year on electrified components
- Lifetime on hardware components 

Notes: - Recommended to be used on appropriately reinforced doors


DescriptionFile Number
DescriptionFile Number
Motorized ELR Installation InstructionsI-ED01722 Rev 4
Wire Routing/Door Prep InstructionsI-ED00367-Rev9
12-Wire Harness InstructionsI-CT00098
DescriptionFile Number
UL Listed Fire Rated Exit Hardwarefire-rated-exit-device-listings-09-2018
4500/4600 Series Flush End Cap Installation InstructionsI-ED01887
DescriptionFile Number
BHMA CertifiedHandicapUL C/US Listed
Previous Next