Case Study – Two Twelve Clayton

This article appears in the June issue of the Door Security + Safety Magazine.

Two Twelve Clayton – St. Louis’s Largest Multi-Use Project in 30 Years

The City of Clayton is situated just west of St. Louis, Mo., making it a suburb of The Gateway City – but it is much more than that. Clayton is the seat of St. Louis County and the activity in and around the courthouse attracts lawyers, county officials and business leaders to its center on a daily basis.

Clayton’s redevelopment efforts began in the early 1990s with the creation of a Downtown Master Plan, which was revised in 2010. The plan’s introduction states, “Over the last decade, Clayton has experienced significant investment in its central business district, ranging from the Crescent to the Centene Headquarters to the MetroLink stations. With several more projects planned or under construction, Downtown Clayton has become an area with the potential for significant real estate development.”

One such project: Two Twelve Clayton

More …

RSS Feed

Team Member Profile: Brian Clarke, AHC, CDT, CSI – Director, Architectural Specifications & Technical Support

Brian has been with Hager Companies for 14 years and was recently promoted to Director of both the Architectural Specifications Department and Technical Support. We sat down with him recently to ask him a few questions, following a similar format to the DHI Doors + Hardware Faces feature.

CSI_STL_Cot_2014_1

Childhood ambition:  Race car driver

First Job:  Wendys

What led you to the hardware industry:  My dad, Wes Britton, and my grandfather were both in the door and hardware industry.

Proudest professional moment: When I passed my AHC exam and was able to share the news with my dad.

Guilty pleasure:  Spending time at my house with the chickens, dogs, cats and horse.

Favorite book/movie: Tombstone

Mentor/hero: My father, Wes.

Best advice you ever received:  Make sure you give your employer 100% effort every day, no matter what is going on in your personal life.

Best advise you never received: Don’t let someone else’s work performance interfere with your work performance.

The advice you would give someone entering into this industry: Keep an open mind about everything. There are always two sides to each situation.

If you would like more information about Hager specifications, Brian will be happy to help you. He can be reached at 314-633-2803 or [email protected]

 

 

 

RSS Feed

Texas Society of Architects 2016 Convergence – Booth 229

We’ll be heading down to San Antonio, Texas in a few weeks to exhibit at the 2016 Texas Society of Architects Design Expo. This is one of the premier regional architectural shows in the country. Architects take this show seriously and are extremely generous with their time on the expo hall floor.

Last year we highlighted our new 9400 Series stainless steel sliding barn door hardware. This year, we added the Conestoga to our sliding door hardware line, which is powder coated black aluminum for a rustic appearance. There are four styles of hangers offered; three face-mount and one top-mount. Sliding barn doors continue to be a popular choice with architects and end users. In addition to saving floor space, sliding doors also meet ADA requirements and are easy for people with disabilities to use.

ConestogaPNG

With the Conestoga as the latest addition, we feel our sliding door hardware product line provides a variety of design choices for your architectural needs. Of course, we will have many other product lines on display too.

More …

RSS Feed

Project Profile: Community Education Building, Wilmington Delaware

In its second year, the Great Oaks Charter School is part of a collection of schools that includes Academia Antonia Alonso School and Kuumba Academy. The building was originally a bank, operating as MBNA then Bank of America. It was donated in 2012 by Bank of America to the Longwood Foundation to start the Community Education Building (CEB).

Owner:                                     Community Education Building

Architect:                                  Homsey Architects, Inc.

General Contractor:                 Wohlsen Construction

Distributor:                               Premier Door, Frame and Hardware

Hager Sales Rep. Agency:      Hardware Specialty Group

 

Hager Company Hardware in CBE School in Wilmington DE Oct 2015 credit photograph by Eric Crossan 302-378-1700

 

More …

RSS Feed

New Catalog Release

Our new catalog is out!  If you have requested a catalog in the last few months and haven’t received it yet, you should be shortly. In the meantime, we did upload a file to our website, both complete and in sections.

Here is a link to the catalog on our website –Hager Catalog

Cover

 

If you’re new to Hager or the door hardware industry the general information in front of the hinge section. has great tips. You can find information on ANSI, how many hinges are needed to support a different weighted doors, security features, and specialty hinges.  Did you know we have two different styles of cover channels for our Roton continuous hinges? Click here to learn more.

Did you know we have two different styles of cover channels for our Roton continuous hinges? Click here to find out more.

Of course, we aren’t just a hinge company. You can find information on our  locks, exit devices, and closers by clicking each product line name.

A couple of new products we’ve released in the last few months in our exit device line include a flush end cap and photoluminescent push bar cover option. You can learn more about these products by reading our blog post.

We know you’ll take some time to familiarize yourself with all the great information found in our new catalog. Of course, you can always call your local sales representative or our customer service department for more info.

Have a great day and thanks for your support!!

 

 

RSS Feed

Project Profile – Tom/Scot

The Tom/Scot is one of those unique multi-use projects that blends high-end residential with commercial architectural openings. Mixed within the 278 units are studios, one, two and three bedroom units. The complex also has a  2 story fitness center that includes a yoga room, climbing wall, spinning room and UFC room. Other amenities include a club room and business center with conference room.

Tom_Scot_Bldg_JH_June_2016.3jpg

 

Owner:                          Connell Real Estate Development Co.

End User:                     Tom/Scot

Architect:                      K & I Homes LLC

General Contractor:   Weitz Co.

Distributor:                   89A

Door Openings:          3100

Typically on a project of this size the sub-contractors and suppliers are all contracted at roughly the same time. 89A was introduced to this opportunity later than the other subcontractors due to the ongoing design and procurement changes involving Division 8710 of the construction scope.  Supporting 89A with Hager’s one brand solutions, we were able to engineer and supply both mechanical & access control door hardware in the different grades required, maintaining the variety of this multi-use project. Our 3400 Series locks, 4500 Series exit devices and 5200 Series closers were supplied on the exterior and high use common areas which needed Grade 1 hardware while our Grade 2 3600 Series, with an adjustable backset, was used for the apartments interior doors.

Thanks to Hager team members Adam Rummler with Hager Southwest and Jeff Halverson with Unified Solutions who were integral in assisting 89A’s procurement efforts.

 

Internet

 

If you would like to learn more about how we can help with your project please contact your local representative.

RSS Feed

Keeping Patients Safe Through Life Safety Hardware by Jill Gile, CSI, CDT

Jill Gile is the newest member of Commencement Bay Architectural Group, a manufacturers’ sales agency that represent’s Hager in the Pacific Northwest. She has jumped into the hardware industry with a big splash including recently passing her CDT exam.

This is an article she wrote for the June Edition of the DHI Doors & Hardware Magazine and reprinted here with both Jill’s & DHI’s permission.

____

DHI_Logo_FINAL

 

Humans are a reactive species. We tend to carry on with a standard mode of operation until an emergency tells us that we might have to change our ways. This holds true for many aspects of our lives, personal and professional. It might be as simple as changing eating habits to as big as the Titanic creating laws about lifeboat requirements.

For the construction industry, unfortunately, we are faced with Titanic-level issues of life safety. Rules regarding fire codes and ADA accessibility issues are some of the main examples of changes the industry has had to face.

More …

RSS Feed

DHI ConNextions 2016 Part II

DHI-2014_BShockley_RHagerDHI ConNextions 2016 is next week and we are excited for a number of reasons. First and foremost we always like to connect with our customers to hear how they are, how their year is going and share our new products. Many of our independent sales representatives attend and it is an opportunity to exchange ideas on products and services, making sure we are meeting our customers needs.

We take safety and security seriously and in order to service our customers it is imperative we stay up-to-date on the latest building, fire, ADA codes, etc. Our team members are always interested in the education sessions that DHI offers.

 

On Thursday, May 5th at 8:30 AM DHI members will have the opportunity to hear about the new changes to DHI at “Celebrating Our Industry – Dedicated to You!” The industry has changed dramatically 8 years ago and we have a new normal.  We’re looking forward to hearing how DHI will assist its members in the future.

More …

RSS Feed

Team Member Profile – Sharon Rainwater

Sharon celebrated 25 years with Hager in February of 2016, which is quite an accomplishment!  Sharon started with Hager Co. in February of 1991 and currently holds the position of Assistant Customer Service Manager.

Sharon.Rainwater

In Sharon’s own words:

Childhood ambition: Loved music, but chose to be an Administrative Assistant like my mom.

First job:  Steak N Shake.

What led you to the hardware industry:  I was looking for an Administrative Assistant job and Hager had an opening. I was hired by Steve Tenholder to work as an Administrative Assistant for the Marketing Department. I was then asked to work for members of the Hager family a few years later. At that time, Warren Hager was responsible for the Roton Continuous Hinge product line. When he was out of the office, I used to take phone calls and started asking questions about the product. I also worked for Susie Wiegand who would receive phone calls from certain customers on Architectural and Residential products.

Proudest professional moment: When I succeeded in my job at hand and was promoted for my efforts.

Biggest challenge: Learning locks and masterkeying.

Mentor/Hero: My Grandma.

Best advice you ever received: That life is a challenge and you should never stop trying to be a better .person.

Best advice you never received: If you make a mistake, own it and move on. Don’t blame others.

Guilty pleasure: Chocolate.

**

We are so glad Sharon is on the Hager team, leading with her knowledge and 100% dedication.  Thanks for your hard work and fortitude Sharon!

 

RSS Feed

Lubricants

During a cold snap, when temperatures dropped below freezing, the deadbolt to my garage froze and the key wouldn’t turn. I was renting at the time so I called the property maintenance company who told me to use a hair dryer to unfreeze the lock, so I could get to work. Then the person added “I’ll send someone out to spray it with WD-40.”

Being in the hardware business we hear and learn new things every day. One of the things I learn early on is while WD-40 is good for a lot of uses, it isn’t good to spray in locks.

Our Director of Engineering, Mark McRae, wrote a White Paper on the subject, which we have shared below. There is a lot of good technical information but basically our Director of Engineering recommends using White Lithium Grease for hinges, locks, and other door hardware.

**********

The WD-40 vs White Lithium Grease vs Silicon Spray by Mark McRae
________________________________________
From getting loose a stuck bolt to lubricating metal to metal and metal to non-metal friction areas.

There are a lot of oils/lubricants/greases available for specific purposes and some that will work for a wide range of applications.

Below is information on WD-40, Silicon Spray and White Lithium Grease as they are by far the most popular “multipurpose” lubricant/greases.

WD-40

WD-40 (Water Displacement, 40th attempt) is a product that everyone uses indiscriminately on a wide range of materials.

More …

RSS Feed