Latch Protectors

Being a door hardware manufacturer we are passionate about security. Keeping a door shut and locked plays an important role in keeping people safe. When you hear “security” you may be envisioning a lot of different equipment like cameras, card readers, and maybe even grilles over doors and windows. Hager offers several levels of door hardware security options, but depending on your facility some simple, first steps, may be a better choice.

In the photos below you’ll notice a metal plate that runs vertically along the seam of the pair of doors, by the lockset. This metal plate is called a latch protector and they are available in a wide range of sizes, finishes, and shapes so they can be installed or retrofitted to most locks on both single and pairs of doors.

While we don’t recommend this application, we appreciate the effort of the building owner to resolve a security issue on an existing pair of doors.

This piece of hardware is designed to deter forced entry through door prying, kick-ins, and other actions to gain unauthorized access. Latch protectors provide simple protection from break-ins that is easy to install and is a low-cost first step in a line of defense.  Door openings where latch protectors may be useful include exterior entry, storage, equipment, or any opening where you need a little extra bit of security.

For more information about our latch protection products or any of our many other security products please contact your local sales representative or our customer service department at 800-255-3590.

 

RSS Feed

New Accessories for the Roton® Continuous Geared Hinge Product Line

In keeping with our promise to provide products that enhance the safety and security of our customers, Hager Companies announces the new TIPIT® and the newly designed Hospital Tip for our Roton® Continuous Hinge product line.

TIPIT®
This product was designed specifically with safety in mind. When door openings are fitted with the patented TIPIT® in conjunction with our Roton Continuous Geared Hinge, this combination provides a safe environment while meeting institutional requirements for preventing objects from being hung from the top of the hinge.

Made from durable, high-tech polymer the TIPIT® securely fastens to the door frame header using the included #10 TORX® SST security screws. Offered in two models, Concealed and Full Surface and two finished, Gray and Black. Suitable for both retrofit and new construction applications in the following vertical markets: Hospitals, Correctional facilities, Schools, Rehabilitation centers, and other institutions.

More …

RSS Feed

Everything You’ve Always Wanted to Know About Door Closers by Vince Butler

This article appears in the January issue of the DHI Security + Safety Magazine and is reprinted here with their permission.

Everything You’ve Always Wanted to Know About Door Closers by Vince Butler

Door closers – if you’ll pardon the pun – literally go over most people’s heads. They are usually installed at the top of doors and door frames, out of the line of sight, unnoticed. Most door closers are purposely designed to match the door and frame so they don’t attract attention.

More …

RSS Feed

Congratulations Are in Order

DHI Door Security + Safety Magazine recently announced the winners of the Robert G. Ryan Awards.  The awards are presented to the best volunteer authors of articles appearing in the previous calendar year in the magazine and cover both technical and business-related topics.

Two team members won in the category of – Feature and Business Article.

First place went to Brian Clarke, DHT, AHC, DHC, CFDAI for his article Securing Schools: Solutions Trends in Educational Facilities from the June 2017 DSS magazine issue.  Brian also received the Recognition of Outstanding Service and Involvement (ROSI) award and celebrated 5 years as a DHI instructor.

Second place went to Dan White for his article The Gravity of Mentorship from the September 2017 DSS magazine issue.

We are very proud of Brian and Dan and appreciate their dedication and commitment, not only to Hager but to the door and hardware industry.

 

RSS Feed

Access Control: Door Hardware and Code Compliance by Brian Clarke DHT, AHC, CDT, CSI

This article was published in the DHI, Door Security + Safety Magazine in January 2018 issue

Keeping occupants safe is a common goal for facility managers and property owners. As the number of break-ins, active shooter incidents and other violent encounters continue to grow, controlling who enters a building has become more vital than ever before.

For healthcare, education and office buildings, standard door and key configurations do not always provide the type of security necessary. This is leading decision-makers to look at more sophisticated access control solutions. The electronic access control market has become more refined in recent years and it is important to know what is available and what may fit the needs of a given facility. Furthermore, the type of hardware chosen must be code-compliant, making proper selection even more important.

In high use buildings, such as a school or office building, access control must allow for a door opening to have free means of egress, during an emergency, along with fire protection and meet accessibility requirements. The International Building Code (IBC) defines an accessible means of egress as a “continued and unobstructed way of egress travel from any point in a building or facility that provides an accessible route to an area of refuge, a horizontal exit or a public way.”

More …

RSS Feed

NFMT 2016 – Recap

We are back from the NFMT Show in Baltimore and as always, we had a great time. This is a terrific show to see, and listen to the people who install and maintain our hardware.

NFMT_Sign_03162016

The Hager Team arrived in Baltimore Monday to bright blue skies.  After a stop to drop off luggage at the Hilton Inner Harbor we headed to the Baltimore Convention Center to organize the product displays, giveaways and literature in our booth.

NFMT_Booth_03212016

The Hilton Inner Harbor and Baltimore Convention Center sit a block from Camden Yards. Too bad baseball season hadn’t started yet!

NFMT_CamdenYards_03222016

More …

RSS Feed

June is National Safety Month – Part III

This is Part III of our contribution to National Safety Month.

With manufacturing and distribution facilities located around the world we are aware of the potential safety risks to our employees. We diligently work to minimize those risks with employee training and safety meetings, including programs like Safety by Choice, Not by Chance.

Edward Robinson is a Warehouse Worker who began working at Hager’s Montgomery Distribution Center in 2006. He transferred to our Phoenix facility in 2010.  Edward’s job duties include receiving, stocking, replenishment, picking, shipping and itemizing. 

Here is why Edward feels Safety by Choice, Not by Chance is important:

 
Safety by Choice Not by Chance is important to me because I’m a
 motorcycle rider in a state that you wear a helmet by choice. It’s my
 choice to wear my helmet and be as safe as possible. I had an
 accident and if it wasn’t my choice to be safe and wear a helmet
 I probably wouldn’t be here today, so safety by choice is very
  important to me. It may have just saved my life!”

We are happy you wore your motorcycle helmet too Edward! Thanks for making safety your choice!

RSS Feed

Project Profile: University Place at West Virginia University

Having a safe and comfortable living space is important all the time but never more so than when a person moves away from home for the first time. Often, that first time happens when kids are off to college.

Architect:                   Grimm + Parker
Developer:                 Paradigm Development Group LLC
General Contractor:   Turner Construction
Distributor:                 A. G. Mauro Company
Door Openings:         300
Project Dollar Value:  $70,000,000

photo by Grimm + Parker

The team above hit all the highlights when they designed and built University Place, a student housing community near West Virginia University.

Hager Co put together a comprehensive commercial hardware package that included standard and heavy duty products to match the door use frequency and kept within budget. More …

RSS Feed

Education and Training

Is one of your New Year’s Resolutions pursuing additional continuing education?

We can make it easy for you to check that off your list! Here at Hager Companies we believe the more informed our customers are about door openings, codes and our products the more successful a project will be.

That is why we offer training for pretty much everyone in the building industry. From architects, specifiers, distributors, physical plant maintenance personnel to end users or we can create a training session specifically for your team.

These education sessions can be held at your office so you don’t have to worry about completing those pesky travel reports.

 

Or, if you would like to set up training at a central location in order that several of your personnel from different branches can attend we can do that too.

 

 

We also have a National Sales & Product Training Manager who travels the United States sharing her 20 year knowledge about the industry.

 

 

Several of our educational sessions are AIA accredited. Below is just a small sample of the sessions we offer. For a complete list click here.

 

 

Give your local sales representative a call to learn more.

RSS Feed