Project Profile – Tom/Scot

The Tom/Scot is one of those unique multi-use projects that blends high-end residential with commercial architectural openings. Mixed within the 278 units are studios, one, two and three bedroom units. The complex also has a  2 story fitness center that includes a yoga room, climbing wall, spinning room and UFC room. Other amenities include a club room and business center with conference room.

Tom_Scot_Bldg_JH_June_2016.3jpg

 

Owner:                          Connell Real Estate Development Co.

End User:                     Tom/Scot

Architect:                      K & I Homes LLC

General Contractor:   Weitz Co.

Distributor:                   89A

Door Openings:          3100

Typically on a project of this size the sub-contractors and suppliers are all contracted at roughly the same time. 89A was introduced to this opportunity later than the other subcontractors due to the ongoing design and procurement changes involving Division 8710 of the construction scope.  Supporting 89A with Hager’s one brand solutions, we were able to engineer and supply both mechanical & access control door hardware in the different grades required, maintaining the variety of this multi-use project. Our 3400 Series locks, 4500 Series exit devices and 5200 Series closers were supplied on the exterior and high use common areas which needed Grade 1 hardware while our Grade 2 3600 Series, with an adjustable backset, was used for the apartments interior doors.

Thanks to Hager team members Adam Rummler with Hager Southwest and Jeff Halverson with Unified Solutions who were integral in assisting 89A’s procurement efforts.

 

Internet

 

If you would like to learn more about how we can help with your project please contact your local representative.

RSS Feed

America – the Land of Opportunity

In America, we are getting ready to celebrate Independence Day on July 4th. Often the day is spent with family and friends enjoying good food and games, with fireworks lighting up the sky at night. It’s a good time to reflect how Hager Companies came to be.

In 1848 Charles Hager immigrated to the United States from Germany. Sailing into New Orleans, Charles then traveled to St. Louis by wagon and quickly found work as a blacksmith. The owner of the business caught gold fever and headed west, selling the shop in St. Louis to Charles.

BLACKSMI

Charles quickly realized his training as a blacksmith and wheelwright would position him well as the flood of Easterners poured through St. Louis, on their way west. Forging wheel rims and hardware for their Conestoga wagons and hammering out his worn files into knives used by fur traders and mountain men, the business grew.

More …

RSS Feed

New Products!

We’ve launched some new product in the first half of 2016!

For our Exit Device Product Line we’ve added:

 

Photoluminesce
A photoluminescent push bar cover option for our 4500 & 4600 Series.  Meeting both IBC & NFPA 101 as noted.

IBC 1024.2.6.2 Door hardware markings. Door hardware shall be marked with no less than 16 square inches (406 mm2) of luminous material. This marking shall be located behind, immediately adjacent to or on the door handle and/or escutcheon. Where a panic bar is installed, such material shall be no less than 1 inch (25 mm) wide for the entire length of the actuating bar or touchpad.

NFPA 101 – The Life Safety Code 7.2.2.5.5.7 Door Hardware Marking. The door hardware for the doors serving the exit enclosures that swing out from the enclosure in the direction of egress travel shall be provided with a marking stripe. The marking stripe shall also meet the following requirements:

(1) The door hardware necessary to release the latch shall be outlined with marking stripe having a minimum horizontal width of 1 inch (25 mm).
(2) Where panic hardware is installed, the following criteria shall be met:
(a) The marking stripe shall have a minimum horizontal width of 1 inch (25 mm) and be applied to the entire length of the actuating bar or touch pad.
(b) The placement of the marking stripe shall not interfere with viewing of any instructions on the actuating bar or touch pad.

More …

RSS Feed

VSO International Company Limited

One of our authorized distributors in the Peoples Republic of China held the official opening of their Hager showroom in March, 2016.

VSO_NamePlate

 

Hager_Tag_Line

 

VSO International Company Limited, located in Guangzhou, South China, built a spectacular showroom with multiple displays of Hager products – both American and European style.

Hager_Display_Board1

More …

RSS Feed

Keeping Patients Safe Through Life Safety Hardware by Jill Gile, CSI, CDT

Jill Gile is the newest member of Commencement Bay Architectural Group, a manufacturers’ sales agency that represent’s Hager in the Pacific Northwest. She has jumped into the hardware industry with a big splash including recently passing her CDT exam.

This is an article she wrote for the June Edition of the DHI Doors & Hardware Magazine and reprinted here with both Jill’s & DHI’s permission.

____

DHI_Logo_FINAL

 

Humans are a reactive species. We tend to carry on with a standard mode of operation until an emergency tells us that we might have to change our ways. This holds true for many aspects of our lives, personal and professional. It might be as simple as changing eating habits to as big as the Titanic creating laws about lifeboat requirements.

For the construction industry, unfortunately, we are faced with Titanic-level issues of life safety. Rules regarding fire codes and ADA accessibility issues are some of the main examples of changes the industry has had to face.

More …

RSS Feed

UCLA Lockdown

Yesterday there was a lock down on the UCLA campus in the Engineering 4 building. With the use of social media word spread quickly and students definitely took the alert the school sent out seriously.

Several students posted photos on social media showing how they were barricading themselves in rooms including rooms where the doors had no locking devices.  It is difficult to determine from the photos if the rooms are specifically classrooms or not.

UCLA_June_1_2016_P3No indication if the door had locking
hardware on it and this was for reinforcement

UCLA_June_1_2016_P2@Jasonschechter states “doors open outward
and aren’t able to be locked.” Can’t tell from photo if
device is a passage function, classroom function
or if the lock wasn’t operational. If classroom function
the students were smart not to open the door to
lock from exterior side.

UCLA_June_1_2016_P1This room looks like it could be a classroom.
@whydaphnewhy is stating the “doors open outward, no locks.”

More …

RSS Feed

2010 ADA Standards for Accessible Design

2010 ADA Standards for Accessible Design

We have received numerous requests for clarification due to an editorial change concerning the maximum allowable force to operate door hardware when the 2010 ADA Standards for Accessible Design became effective in March of 2012.

Prior to the 2010 edition the ADA standards required door hardware to have “a shape that is easy to grasp, and does not require tight grasping, tight pinching, or twisting of the wrist to operate.” The wording does not reference any other section nor does it mention a force limitation. A paragraph relative to door opening force, which is different than operational force, stated that interior, non-fire-rated doors must have a maximum opening force of 5 pounds, but clarified the statement by stating, “These forces do not apply to the force required to retract latch bolts or disengage other devices that may hold the door in a closed position.”

Section 404.2.7 on door hardware reads: “Door and Gate Hardware. Handles, pulls, latches, locks and other operable parts on doors and gates shall comply with 309.4. Operable parts of such hardware shall be 34 inches (865 mm) minimum and 48 inches (120 mm) maximum above the finish floor or ground. Where sliding doors are in the fully open position, operating hardware shall be exposed and usable from both sides.”

More …

RSS Feed

International Sales Meeting

With 167 years of history in St. Louis sometimes it’s easy to forget that Hager is a international company.  We have projects going on all over the world, from the Grand Egyptian Museum currently being built in Cairo to the completed Sheraton Zhanjiang Minda Hotel in Zhanjiang City, Guangdong Province in China.

Our Vice President of International Sales, James Stokes, has a great team of international sales representatives that travels the globe. Two weeks ago they gathered in St. Louis for their sales meeting.

A lot was discussed in the two day meeting.  From a business brief to detailed product line and technical training from our engineering team, tech support crew and product managers and, of course, taking time to catch up with the Hagers.

IMG_3983Sitting with technical & engineering

More …

RSS Feed

DHI ConNextions 2016 Part II

DHI-2014_BShockley_RHagerDHI ConNextions 2016 is next week and we are excited for a number of reasons. First and foremost we always like to connect with our customers to hear how they are, how their year is going and share our new products. Many of our independent sales representatives attend and it is an opportunity to exchange ideas on products and services, making sure we are meeting our customers needs.

We take safety and security seriously and in order to service our customers it is imperative we stay up-to-date on the latest building, fire, ADA codes, etc. Our team members are always interested in the education sessions that DHI offers.

 

On Thursday, May 5th at 8:30 AM DHI members will have the opportunity to hear about the new changes to DHI at “Celebrating Our Industry – Dedicated to You!” The industry has changed dramatically 8 years ago and we have a new normal.  We’re looking forward to hearing how DHI will assist its members in the future.

More …

RSS Feed

The Conestoga will be rolling into conNextions 2016 at Booth 431!

You’ve seen our  9400 Series Stainless Steel Barn Door Sliding Hardware right? It has received fabulous feed back from architects and customers.

Photo_by_jhparch_1_march2016

On it’s heels we are adding the Conestoga Series, which is a black aluminum flat rail with 4 different hanger styles. And it’s made in the U.S.A.!

ConestogaPNG

From modern – 9710 Series – to industrial – 9400 Series – and now our brand new rustic Conestoga Series – we offer it all under

One Family. One Brand. One Vision. 

Stop by Booth 431 to see displays, hanger samples and talk with Bryan Meyer, the Product Manager for this line. Ralph, Josh, Johnston and August Hager will also be on hand to say hello and hear what you think of our latest product.

 

 

 

RSS Feed
  1. 1
  2. 2
  3. 3
  4. 4
  5. 5
  6. 6
  7. 7
  8. 8
  9. 9
  10. 10
  11. 11