Why is the Bottom Rod Missing?

Have you ever come across a pair of doors that have just a top vertical rod exit device and not top and bottom, and wondered why? Often an architect or specification writer will specify “less bottom rod (LBR)” on pairs of doors, especially in healthcare facilities.

This photo was taken in an assisted living facility here in St. Louis. This opening is a pair of fire rated corridor doors which means they must positively latch in case of a fire to control flames and smoke from traveling through the facility. Without latching hardware on the exit device itself, positive latching is accomplished with the surface mounted top vertical rod. As you can see from the picture, the door is being held open with a magnetic hold open tied into the fire alarm. If the fire alarm is activated the hold open will release the door. The door closer will swing the door shut and the top vertical rod will latch the door.

This leads us to the question of why the architect or specification writer specified LBR. While the top and bottom vertical rods help secure the door, the bottom vertical rod is secured to a floor strike mounted in the floor. That floor strike can become a tripping hazard to people that use mobility devices, such as canes, walkers, crutches, and wheelchairs. ADA regulation 404.2.10, Door and Gate Surfaces, states: “Swing door and gate surfaces within 10 inches (255mm) of the finish floor or ground measured vertically shall have a smooth surface on the push side extending the full width of the door or gate.” The regulation goes on to specify how thick protection plates and installation screws can be.

This installation is a textbook example of the intersection of fire code and ADA regulations. The goal is to keep people safe both from fire and tripping. When architects and door hardware professionals work together, the result can be a safe, attractive and code compliant facility.

For assistance in writing door hardware specifications please contact Brian Clarke at [email protected]. For information regarding our products please contact our customer service team at 800-255-3590 or your local sales representative.

RSS Feed

Just 7 Weeks Before the End … of 2018

It’s almost the end of the year so we wanted to take this opportunity to sweep up a few housekeeping items – learning credits and marketing funds.

Learning Credits

Are you, or anyone you know, scrambling to finish up learning credits before the end of the year?  We offer several one-hour continuing education AIA/CES courses. Check out our brochure here.

Access Control 101 | 1.0 LU/HSW
This course defines the differences between access control “head-end” systems and traditional (metal cut keys) key replacement systems. We will review the different types of credentials (metal keys, card keys, fobs, etc) as well as battery operated products vs. fully hard-wired electrified locking systems. Lastly, we will teach you the do’s and don’ts for code compliance.

ADA: Meeting Accessibility Standards for Openings | 1.0 LU/HSW
This course features an overview of compliance with ADA, physical disabilities, and ANSI A117.1 Chapter 404 for doors, doorways, and gates. We will also discuss approach dimensions compliances.

More …

RSS Feed

Product Launches

There have been several exciting announcements regarding our Hager powered by Salto HS4 and Electronic Solutions product lines this week! To make sure you haven’t missed any here is a short recap:

HS4 Electronic Access Control

KS – Keys as a Service  WebpageBrochure | Press Release

An HS4 electronic access control platform for mobile and remote administrators. KS is a cloud-based access control platform that is managed from a smartphone, tablet, or PC, and accessed from a remote software engine. Always up-to-date with the latest features via instant updates and add-ons, the KS platform is easily maintained and managed. Infinite in size, it ensures real-time monitoring and immediate resolutions of any issues with a clear audit trail. These benefits and features make the KS platform perfect for retail, rental properties, and the ever more popular shared workspace markets.

 

More …

RSS Feed

The Next Generation

The gifted class from the Central Christian School visited Hager headquarters a few weeks ago. They were learning about the engineering profession and the different types of engineer specialties. A daughter of our COO, Josh Hager, is in the class and he offered to have the students visit Hager and hear from our engineers what they do.

Mark McRae, our Director of Engineering, and Daniel Sprehe, a Product Engineer, spoke with the students about the engineering process a product takes, from conception to manufacturing.  They spoke about how once a design has been approved a prototype is created along with the amount of testing it takes before a product is ready to be sold. They also shared the difference between a mechanical and electronic engineer and how they work together.

More …

RSS Feed

DHI ConNextions 2018 – Booth 319

Next week, several members of the Hager Family and team members will head to Baltimore for the annual DHI ConNextions show.

For the Hager team, this show is all about connecting with our customers.  We want to hear what’s new in their lives and businesses; collaborate our efforts in order to grow their sales; and, of course, showcase our new products. In the last year, we’ve released the following products:

We will also have demonstrations with our HS4 Electronic Access Control products including the newest communication platform BLUEnet. We are especially excited by BLUEnet’s ability to provide a real-time (within 4 seconds) lock communication, keeping people safer in an active shooter situation.

 

If you’d like to attend the show but haven’t purchased a pass yet, we have complimentary VIP Exhibit Hall Passes available. Just click on this link and in the Promo Code box type hagevip.

We look forward to seeing you!


 

 

RSS Feed

The DSSF / Hager Companies Scholarship Winner!

We have always felt educating the next generation is an important aspect of our business and industry. Offering continuing education to our team members through the Door and Hardware Institute (DHI), the Construction Specifications Institute (CSI), among other organizations on key programs related to safety and security issues is another key step.

DHI’s Safety & Security Foundation (DSSF) also encourages and attracts new talent to the industry and gives them the training, tools and education to help them be successful. It was an easy decision to partner with the Foundation and establish the Hager Companies Scholarship.

This year we congratulate Alison Nugent, a senior detailer with DH Pace in Olathe, Kansas as the winner of the Hager Companies Scholarship! Alison answered a few questions DHI put forth to all the winners in November’s issue of Doors + Hardware Magazine and we wanted to share her responses here.

How did you get started in the door and hardware industry?
I returned from a summer internship in the United Kingdom and was looking for a full-time position.

What is the most rewarding aspect of your job?
I enjoy providing a service that helps create functional buildings that meet the needs of people who use them every day. While the industry can be challenging, I enjoy being a technical resource for architects and general contractors.

How do you de-stress?
I de-stress by cleaning and organizing things. I also enjoy exercising and playing sports.

If you weren’t a door security and safety professional, what would you be?
I would work in a position in the sports industry. I grew up playing a lot of sports and I am a big sports fan.

Who is your mentor/hero?
My mentor was my late co-worker Steve Holden. Steve had over 30 years’ experience in this industry and was full of knowledge. He was an incredible resource and person and I am thankful for everything he taught me.

What is your advice to someone considering taking DHI technical education?
The DHI technical education is a big commitment, but worth the effort. While it can seem overwhelming, focus on completing one class at a time. That has helped me stay motivated to achieve my overall goal.

What is the best advice you’ve ever received?
Something that my family, friends, teachers and co-workers have all shared: Do not be afraid to ask questions.” Asking questions demonstrates a desire to learn and grow. I have learned a lot by asking questions and will continue to do that throughout my career.

Congratulations and wishing you continued success Alison! You can read about all the winners on DSSF website here.

 

RSS Feed

New Catalog Release

Our new catalog is out!  If you have requested a catalog in the last few months and haven’t received it yet, you should be shortly. In the meantime, we did upload a file to our website, both complete and in sections.

Here is a link to the catalog on our website –Hager Catalog

Cover

 

If you’re new to Hager or the door hardware industry the general information in front of the hinge section. has great tips. You can find information on ANSI, how many hinges are needed to support a different weighted doors, security features, and specialty hinges.  Did you know we have two different styles of cover channels for our Roton continuous hinges? Click here to learn more.

Did you know we have two different styles of cover channels for our Roton continuous hinges? Click here to find out more.

Of course, we aren’t just a hinge company. You can find information on our  locks, exit devices, and closers by clicking each product line name.

A couple of new products we’ve released in the last few months in our exit device line include a flush end cap and photoluminescent push bar cover option. You can learn more about these products by reading our blog post.

We know you’ll take some time to familiarize yourself with all the great information found in our new catalog. Of course, you can always call your local sales representative or our customer service department for more info.

Have a great day and thanks for your support!!

 

 

RSS Feed

Touchless Actuators

It is a fact of life that we can’t get away from germs, but there are ways to control the spread of them.

That’s why we’re excited to announce our new line of touchless actuators. For use with our 8400 & 8200 Series low energy power operators, the touchless actuators employ capacitance technology similar to smart devices. They have an adjustable sensing range from 0″-4″ and a LED illumination which increases plate visibility.

2-659-0303                                                                                   2-659-0303

More …

RSS Feed

CONSTRUCT – 2016

In a just a month, we will be in Austin, Texas exhibiting at CONSTRUCT 2016.

CONSTRUCT_2016_logo

CONSTRUCT is the trade show for the Construction Specifications Institute (CSI). The Institute brings together all aspects of the building divisions, from architects, specifiers, product representation, and contract administration. CSI’s mission is to “advance building information management and education of project teams to improve facility performance.”

CONSTRUCT supports that mission by providing a plethora of educational opportunities including a day set aside specifically for young professionals called YP Day.  This is a fantastic opportunity for those just starting out in the industry, 35 years and younger, to learn a lot in a single day.  This day goes beyond typical design education into real world scenarios.

Lock_Contest_Go
2015 YP Day

More …

RSS Feed